DRIVER MODEL REFERENCE

Tour Edge Exotics Lite (2026 US page)

Exotics Lite driver from Tour Edge’s US product page: 2 heads from 10.5° to 12°, 46 in.

Published loft options
10.5, 12°
Published lie
60°
Published length
46 in
Tour Edge Exotics Lite (2026 US page)
Model image · Tour Edge Exotics Lite. Image source ↗

Documented specifications & build options

Standard head specifications from Tour Edge’s US table, lengths in inches. The face-angle column reads 1° offset for both heads.

Tour Edge Exotics Lite · manufacturer specifications
FieldDocumented value
Published loft options10.5, 12 °
Published lie60 °
Published length46 in
Published head volume460 cc
Listed shaft optionsFujikura Ventus White/Black

Source: Tour Edge Exotics Lite US product page specifications. Reviewed 2026-10-22.

Specifications by configuration

Tour Edge Exotics Lite · documented configurations
ConfigurationPublished values
10.5° head ↗
Loft: 10.5 °
Lie: 60 °
Length: 46 in
Head volume: 460 cc
Face angle: 1° Offset
Handedness: RH
12° head ↗
Loft: 12 °
Lie: 60 °
Length: 46 in
Head volume: 460 cc
Face angle: 1° Offset
Handedness: RH

Identifying the right model

  • A carbon-weave sole with EXOTICS LITE in the centre, a TE monogram at the crown edge, 10K FORGIVENESS on a panel toward the heel, TUNGSTEN along the toe edge, TOUR EDGE low at the toe and the loft 10.5 by the hosel, with no rear weight port.

What to check before using the reference

  • Right-hand only per Tour Edge’s table heading; both heads are listed at 46 in, half an inch longer than the other Exotics drivers.
Checking a club you own? These are the maker's published figures for an original build, not measurements of your club, and a source date is not the year it was made. Bending, reshafting or a hosel adjustment changes loft, lie and length, so identify the head by its own markings and have a fitter measure it when its history is unclear.