Original iron specifications
Titleist T250 irons (2025)
Titleist T250 (2025), with a 30.5° 7-iron and 43° pitching wedge in Titleist’s published table.
- 7-iron loft
- 30.5°
- Pitching wedge loft
- 43°
- 7-iron length
- 37 in

Loft, lie & length chart
Titleist’s published specification table on the current product page, lengths in inches.
| Club | Loft (°) | Lie (°) | Length (in) |
|---|---|---|---|
| 2 | 18 | 60.5 | 39.5 |
| 3 | 20 | 61 | 39 |
| 4 | 22 | 61.5 | 38.5 |
| 5 | 24 | 62 | 38 |
| 6 | 27 | 62.5 | 37.5 |
| 7 | 30.5 | 63 | 37 |
| 8 | 34.5 | 63.5 | 36.5 |
| 9 | 38.5 | 64 | 36 |
| PW | 43 | 64 | 35.75 |
| W | 48 | 64 | 35.5 |
Source: Titleist T250 irons (2025 T-Series) product page. Checked 2026-10-22.
How to identify this generation
- A 7-iron with a smooth back, a T250 badge at the toe end above a thin chevron line, a Titleist script across the upper back and FORGED down the hosel.
- The T-Series name also appears on these Titleist irons; compare their markings before using this chart: T100, T100·S, T200, T300 (720); T100, T100·S, T200, T300 (2021); T100, T150, T200, T350, T400 (2023); T100, T150, T350 (2025).
What to notice in the specifications
- Titleist publishes one table for the 2025 T-Series: lofts per model, with lie and length per club number shared by T100, T150, T250 and T350; only T250 lists the 2-iron (18°, 60.5°, 39.5 in).
- T250 Launch Spec (marked T250✶ in the table) is the same head family sold with lighter heads and weaker lofts on its own page: 27° 5-iron, 31°, 35°, 39°, 43°, 47° PW and 52° W, same lies and lengths. It is noted here rather than recorded separately.
- Titleist’s 2023 T200 listed a 30.5° 7-iron and 43° PW with the same 5-iron to W lofts as this T250; the 4-iron is 22° here against 21° on T200, and the 2-iron and 3-iron are new to T250.
- Titleist sells the same head in a T250 Black Vapor finish on its own page with no separate table.
Checking a club you own? These are the maker's published figures for an original build, not measurements of your club, and a source date is not the year it was made. Bending, reshafting or a hosel adjustment changes loft, lie and length, so identify the head by its own markings and have a fitter measure it when its history is unclear.
Read our loft guide for a worked example of comparing the numbers, and our used iron checklist before relying on a seller's description.



