IRON SET MODEL REFERENCE
Srixon ZXiU utility irons (2025)
ZXiU utility irons from Srixon’s US product page on Dunlop Sports’ store, listed at 18°, 20°, 23° lofts.
- Published loft options
- 18, 20, 23°
- Published heads
- 2-iron, 3-iron, 4-iron
- Published length range
- 38.75–39.75 in

Documented specifications & build options
Individually sold utility (driving) iron heads, not a full iron set. Length is the steel stock build in inches; the graphite stock length is listed alongside.
| Field | Documented value |
|---|---|
| Published loft options | 18, 20, 23 ° |
| Published heads | 2-iron, 3-iron, 4-iron |
| Published length range | 38.75–39.75 in |
| Stock shaft | TRUE TEMPER DYNAMIC GOLD MID 115; MITSUBISHI MMT UTILITY |
Source: Srixon ZXiU utility irons US product page (Dunlop Sports US store). Reviewed 2026-10-22.
Published specifications by club
| Configuration | Published values |
|---|---|
| 2-iron ↗ | Loft: 18 ° Lie: 60 ° Length: 39.75 in Graphite stock length: 40.25 in Offset: 4.2 mm Handedness: RH/LH |
| 3-iron ↗ | Loft: 20 ° Lie: 60 ° Length: 39.25 in Graphite stock length: 39.75 in Offset: 4.2 mm Handedness: RH/LH |
| 4-iron ↗ | Loft: 23 ° Lie: 60.5 ° Length: 38.75 in Graphite stock length: 39.25 in Offset: 4.2 mm Handedness: RH/LH |
Identifying the right model
- A compact chrome utility back with SRIXON on a raised central bar, ZXiU lettering low toward the toe, MAINFRAME low toward the heel, a 4 23 marking on the top line toward the toe and a small round dot at the far toe; the hosel reads i-FORGED.
What to check before using the reference
- Dunlop’s store labels this page ZXiU Utility Irons (2025) as a previous model; the current ZXiU page (product code MZXIUIRN27, 3.6 mm offset, MAINFRAME IQ lettering) has its own record.
- The table lists steel and graphite stock lengths separately (graphite ½ in longer); Length is the steel figure and the graphite length is given alongside.
- Srixon’s footnote says its published iron lengths now follow USGA and R&A measurement guidelines and read about ¼ in longer than before without the club itself changing.
Checking a club you own? These are the maker's published figures for an original build, not measurements of your club, and a source date is not the year it was made. Bending, reshafting or a hosel adjustment changes loft, lie and length, so identify the head by its own markings and have a fitter measure it when its history is unclear.



