Home/Club database/Iron sets/ZXiU utility irons
IRON SET MODEL REFERENCE

Srixon ZXiU utility irons · Iron set

ZXiU utility irons from Srixon’s US product page on Dunlop Sports’ store, listed at 18°, 20°, 23° lofts.

Published loft options
18, 20, 23°
Published heads
2-iron, 3-iron, 4-iron
Published length range
38.75–39.75 in
Srixon ZXiU utility irons · Iron set
Model image · Srixon ZXiU utility irons. Image source ↗

Documented specifications & build options

Individually sold utility (driving) iron heads, not a full iron set. Length is the steel stock build in inches; the graphite stock length is listed alongside.

Srixon ZXiU utility irons · manufacturer specifications
FieldDocumented value
Published loft options18, 20, 23 °
Published heads2-iron, 3-iron, 4-iron
Published length range38.75–39.75 in
Stock shaftTrue Temper Dynamic Gold Mid 100; Mitsubishi MMT Utility 90/80

Source: Srixon ZXiU utility irons US product page (Dunlop Sports US store). Reviewed 2026-10-22.

Published specifications by club

Srixon ZXiU utility irons · documented configurations
ConfigurationPublished values
2-iron ↗
Loft: 18 °
Lie: 60 °
Length: 39.75 in
Graphite stock length: 40.25 in
Offset: 3.6 mm
Handedness: RH/LH
3-iron ↗
Loft: 20 °
Lie: 60 °
Length: 39.25 in
Graphite stock length: 39.75 in
Offset: 3.6 mm
Handedness: RH/LH
4-iron ↗
Loft: 23 °
Lie: 60.5 °
Length: 38.75 in
Graphite stock length: 39.25 in
Offset: 3.6 mm
Handedness: RH/LH

Identifying the right model

  • A chrome utility back with ZXiU lettering on the upper bar, SRIXON low toward the toe, MAINFRAME IQ lettering low toward the heel, a 4 23 marking on the top line toward the toe and a small round dot at the far toe; the hosel reads i-FORGED.

What to check before using the reference

  • Srixon lists this ZXiU separately from the ZXiU Utility Irons (2025), which has its own record; this head reads MAINFRAME IQ and lists a 3.6 mm offset and D1 swing weights, the 2025 head reads MAINFRAME with 4.2 mm offset.
  • The table lists steel and graphite stock lengths separately (graphite ½ in longer); Length is the steel figure and the graphite length is given alongside.
Checking a club you own? These are the maker's published figures for an original build, not measurements of your club, and a source date is not the year it was made. Bending, reshafting or a hosel adjustment changes loft, lie and length, so identify the head by its own markings and have a fitter measure it when its history is unclear.