PING iCrossover · Iron set

Published loft options

18, 20, 22.5°

Published heads

2-xr, 3-xr, 4-xr

Published length range

39–40.125 in

Documented specifications & build options

Individually sold crossover / driving-iron heads, not a full iron set. Lengths are PING’s standard build in inches, converted from fractional inches (39 1/4" = 39.25"); PING’s footnote says the steel-shaft standard length is 1/2" shorter than the graphite length. Lie angle is PING’s Black colour code at standard length.

Source: PING iCrossover crossover US product page. Reviewed 2026-10-22.

Published specifications by club

Identifying the right model

• A matte-black head with a white PING in the upper cavity bar, iCROSSOVER lettered low on the back toward the heel, a round screw weight in the toe and the club number on the top edge above the toe.

What to check before using the reference

• PING’s iCrossover hosel is adjustable with eight marked settings (PING’s Trajectory Tuning); the loft and lie figures are the standard setting of each head, and the equivalent-iron / equivalent-fairway labels in the rows are PING’s own gapping guide (2-xr = 2-iron / 4-wood).
• The listed stock shafts are all graphite; PING’s footnote says a steel-shafted build is 1/2 in shorter than the graphite length shown.
• PING’s page says the iCrossover blade lengths are slightly shorter with less offset than its previous crossovers, the standard shaft lengths about 1/4 in shorter, and the sole shaping similar to the i230 irons.