IRON SET MODEL REFERENCE
Mizuno Widec II irons (2002-2004 timeline)
Widec II from Mizuno’s 2002-2004 timeline entry, with a 34° 7-iron and 47° pitching wedge in the linked factory chart.
- 7-iron loft
- 34°
- Pitching wedge loft
- 47°
- 7-iron lie
- 62°
Documented specifications & build options
Factory loft and lie table. This linked archive chart omits club lengths and stock shaft details; those remain unknown.
| Field | Documented value |
|---|---|
| 7-iron loft | 34 ° |
| Pitching wedge loft | 47 ° |
| 7-iron lie | 62 ° |
| Published club range | 3, 4, 5, 6, 7, 8, 9, PW, SW |
| Club length | Not supplied in the linked chart |
Source: Mizuno Widec II factory chart linked from the US iron timeline. Reviewed 2026-10-22.
Published specifications by club
| Configuration | Published values |
|---|---|
| 3-iron ↗ | Loft: 22 ° Lie: 59 ° |
| 4-iron ↗ | Loft: 24 ° Lie: 60 ° |
| 5-iron ↗ | Loft: 27 ° Lie: 61 ° |
| 6-iron ↗ | Loft: 30 ° Lie: 61.5 ° |
| 7-iron ↗ | Loft: 34 ° Lie: 62 ° |
| 8-iron ↗ | Loft: 38 ° Lie: 62.5 ° |
| 9-iron ↗ | Loft: 42 ° Lie: 63 ° |
| PW ↗ | Loft: 47 ° Lie: 63.5 ° |
| SW ↗ | Loft: 55 ° Lie: 63.5 ° |
Identifying the right model
- The small timeline photo shows a wide dark cavity with WIDEC II lettered at its centre and four triangular markers in the corners of the cavity.
What to check before using the reference
- The US-site timeline labels this head 2002-2004.
- The linked chart lists a 34° 7-iron and 47° pitching wedge.
- The source range is 3 through SW; it describes listed specifications, not the contents of every retail or used set.
- The chart leaves one row blank between the pitching wedge and the sand wedge, so no gap wedge figure is given.
- Mizuno’s T-Zoid Comp CT chart lists the same lofts from 3-iron to SW with steeper 3- and 4-iron lies; the heads are different models.
- Mizuno’s timeline photo of this head is only 140 pixels wide.
Checking a club you own? These are the maker's published figures for an original build, not measurements of your club, and a source date is not the year it was made. Bending, reshafting or a hosel adjustment changes loft, lie and length, so identify the head by its own markings and have a fitter measure it when its history is unclear.
Continue exploring iron sets
MizunoIron set
Hot Metal irons · JPX925
The JPX925 Hot Metal standard row includes a 28° 7-iron and a 54° set sand wedge.
28° 7-iron loftFull iron chart
MizunoIron set
Hot Metal Pro irons · JPX925
Mizuno publishes the same loft, lie and length sequence for JPX925 Hot Metal and Pro through GW, with different head dimensions.
28° 7-iron loftFull iron chart
MizunoIron set
Hot Metal HL irons · JPX925
The HL variant uses a 31° 7-iron and 45° pitching wedge in the JPX925 chart.
31° 7-iron loftFull iron chart
MizunoIron set
MP-64 irons · 2013-2014 timeline
MP-64 from Mizuno’s 2013-2014 timeline entry, with a 34° 7-iron and 46° pitching wedge in the linked factory chart.
34° 7-iron loftFull iron chart