Mizuno Hot Metal Pro irons (JPX925)
Mizuno publishes the same loft, lie and length sequence for JPX925 Hot Metal and Pro through GW, with different head dimensions.
- 7-iron loft
- 28°
- Pitching wedge loft
- 42°
- 7-iron length
- 37.25 in
Loft, lie & length chart
US JPX925 Hot Metal Pro standard specifications in inches.
| Club | Loft (°) | Lie (°) | Length (in) |
|---|---|---|---|
| 4 | 19 | 60.5 | 38.75 |
| 5 | 22 | 61 | 38.25 |
| 6 | 25 | 61.5 | 37.75 |
| 7 | 28 | 62 | 37.25 |
| 8 | 32.5 | 62.5 | 36.75 |
| 9 | 37 | 63 | 36.25 |
| PW | 42 | 63.5 | 35.75 |
| GW | 48 | 64 | 35.5 |
Source: Mizuno JPX925 Hot Metal Pro specification. Checked 2026-09-28.
How to identify this generation
- The Pro suffix matters: check the head shape and cavity against Mizuno's side-by-side visuals.
- A matching loft chart cannot identify Pro versus standard Hot Metal.
What to notice in the specifications
- The Pro 7-iron is 28° and 37.25 inches in the standard row.
- The manufacturer lists the Pro range through GW, while standard Hot Metal adds a SW.
- Mizuno's comparison gives the Pro a smaller head length; identical angles do not mean identical construction.
Read our loft guide for a worked example of comparing the numbers, and our used iron checklist before relying on a seller's description.
Continue with Mizuno
Hot Metal irons (JPX925)
The JPX925 Hot Metal standard row includes a 28° 7-iron and a 54° set sand wedge.
Hot Metal HL irons (JPX925)
The HL variant uses a 31° 7-iron and 45° pitching wedge in the JPX925 chart.
MP-64 irons (2013-2014 timeline)
MP-64 from Mizuno’s 2013-2014 timeline entry, with a 34° 7-iron and 46° pitching wedge in the linked factory chart.
MP-54 irons (2014-2015 timeline)
MP-54 from Mizuno’s 2014-2015 timeline entry, with a 34° 7-iron and 46° pitching wedge in the linked factory chart.