IRON SET MODEL REFERENCE
Mizuno TCD irons (1992-1993 timeline)
TCD from Mizuno’s 1992-1993 timeline entry, with a 36° 7-iron and 48° pitching wedge in the linked factory chart.
- 7-iron loft
- 36°
- Pitching wedge loft
- 48°
- 7-iron lie
- 61.5°
Documented specifications & build options
Factory loft and lie table. This linked archive chart omits club lengths and stock shaft details; those remain unknown.
| Field | Documented value |
|---|---|
| 7-iron loft | 36 ° |
| Pitching wedge loft | 48 ° |
| 7-iron lie | 61.5 ° |
| Published club range | 1, 2, 3, 4, 5, 6, 7, 8, 9, PW, SW |
| Club length | Not supplied in the linked chart |
Source: Mizuno TCD factory chart linked from the US iron timeline. Reviewed 2026-10-22.
Published specifications by club
| Configuration | Published values |
|---|---|
| 1-iron ↗ | Loft: 16 ° Lie: 56 ° |
| 2-iron ↗ | Loft: 18 ° Lie: 57 ° |
| 3-iron ↗ | Loft: 21 ° Lie: 58 ° |
| 4-iron ↗ | Loft: 24 ° Lie: 59 ° |
| 5-iron ↗ | Loft: 28 ° Lie: 60 ° |
| 6-iron ↗ | Loft: 32 ° Lie: 61 ° |
| 7-iron ↗ | Loft: 36 ° Lie: 61.5 ° |
| 8-iron ↗ | Loft: 40 ° Lie: 62 ° |
| 9-iron ↗ | Loft: 44 ° Lie: 62.5 ° |
| PW ↗ | Loft: 48 ° Lie: 63 ° |
| SW ↗ | Loft: 56 ° Lie: 63 ° |
Identifying the right model
- A chrome back with a rounded recessed panel, small red tcd lettering with a line device toward the toe and the club number beside an M logo low on the toe side.
What to check before using the reference
- The US-site timeline labels this head 1992-1993.
- The linked chart lists a 36° 7-iron and 48° pitching wedge.
- The source range is 1 through SW; it describes listed specifications, not the contents of every retail or used set.
Checking a club you own? These are the maker's published figures for an original build, not measurements of your club, and a source date is not the year it was made. Bending, reshafting or a hosel adjustment changes loft, lie and length, so identify the head by its own markings and have a fitter measure it when its history is unclear.
Continue exploring iron sets
MizunoIron set
Hot Metal irons · JPX925
The JPX925 Hot Metal standard row includes a 28° 7-iron and a 54° set sand wedge.
28° 7-iron loftFull iron chart
MizunoIron set
Hot Metal Pro irons · JPX925
Mizuno publishes the same loft, lie and length sequence for JPX925 Hot Metal and Pro through GW, with different head dimensions.
28° 7-iron loftFull iron chart
MizunoIron set
Hot Metal HL irons · JPX925
The HL variant uses a 31° 7-iron and 45° pitching wedge in the JPX925 chart.
31° 7-iron loftFull iron chart
MizunoIron set
MP-64 irons · 2013-2014 timeline
MP-64 from Mizuno’s 2013-2014 timeline entry, with a 34° 7-iron and 46° pitching wedge in the linked factory chart.
34° 7-iron loftFull iron chart