IRON SET MODEL REFERENCE
Mizuno T-Zoid Sure irons (1999-2000 timeline)
T-Zoid Sure from Mizuno’s 1999-2000 timeline entry, with a 33° 7-iron and 45° pitching wedge in the linked factory chart.
- 7-iron loft
- 33°
- Pitching wedge loft
- 45°
- 7-iron lie
- 62°

Documented specifications & build options
Factory loft and lie table. This linked archive chart omits club lengths and stock shaft details; those remain unknown.
| Field | Documented value |
|---|---|
| 7-iron loft | 33 ° |
| Pitching wedge loft | 45 ° |
| 7-iron lie | 62 ° |
| Published club range | 2, 3, 4, 5, 6, 7, 8, 9, PW, FW, SW |
| Club length | Not supplied in the linked chart |
Source: Mizuno Sure factory chart linked from the US iron timeline. Reviewed 2026-10-22.
Published specifications by club
| Configuration | Published values |
|---|---|
| 2-iron ↗ | Loft: 21 ° Lie: 59.5 ° |
| 3-iron ↗ | Loft: 23 ° Lie: 60 ° |
| 4-iron ↗ | Loft: 25 ° Lie: 60.5 ° |
| 5-iron ↗ | Loft: 27 ° Lie: 61 ° |
| 6-iron ↗ | Loft: 30 ° Lie: 61.5 ° |
| 7-iron ↗ | Loft: 33 ° Lie: 62 ° |
| 8-iron ↗ | Loft: 37 ° Lie: 62.5 ° |
| 9-iron ↗ | Loft: 41 ° Lie: 63 ° |
| PW ↗ | Loft: 45 ° Lie: 63.5 ° |
| FW ↗ | Loft: 50 ° Lie: 63.5 ° |
| SW ↗ | Loft: 56 ° Lie: 63.5 ° |
Identifying the right model
- A silver cavity back split by raised ridges, with the red-and-black T-ZOID logo on the upper panel and SURE lettered below it.
What to check before using the reference
- The US-site timeline labels this head 1999-2000.
- The linked chart lists a 33° 7-iron and 45° pitching wedge.
- The source range is 2 through SW; it describes listed specifications, not the contents of every retail or used set.
- Mizuno’s timeline lists this head simply as “Sure”; the head carries the T-Zoid logo above the name.
- The chart labels its 50° wedge FW. FW is kept as the source’s wedge label; it does not identify a fairway wood.
- Mizuno’s T-3 chart repeats every Sure loft with each lie 0.5° flatter; the heads are different models.
Checking a club you own? These are the maker's published figures for an original build, not measurements of your club, and a source date is not the year it was made. Bending, reshafting or a hosel adjustment changes loft, lie and length, so identify the head by its own markings and have a fitter measure it when its history is unclear.



