IRON SET MODEL REFERENCE
Mizuno MX-900 irons (2006-2007 timeline)
MX-900 from Mizuno’s 2006-2007 timeline entry, with a 34° 7-iron and 46° pitching wedge in the linked factory chart.
- 7-iron loft
- 34°
- Pitching wedge loft
- 46°
- 7-iron lie
- 61.5°
Documented specifications & build options
Factory loft and lie table. This linked archive chart omits club lengths and stock shaft details; those remain unknown.
| Field | Documented value |
|---|---|
| 7-iron loft | 34 ° |
| Pitching wedge loft | 46 ° |
| 7-iron lie | 61.5 ° |
| Published club range | 3, 4, 5, 6, 7, 8, 9, PW |
| Club length | Not supplied in the linked chart |
Source: Mizuno MX-900 factory chart linked from the US iron timeline. Reviewed 2026-10-22.
Published specifications by club
| Configuration | Published values |
|---|---|
| 3-iron ↗ | Loft: 21 ° Lie: 59.5 ° |
| 4-iron ↗ | Loft: 24 ° Lie: 60 ° |
| 5-iron ↗ | Loft: 27 ° Lie: 60.5 ° |
| 6-iron ↗ | Loft: 30 ° Lie: 61 ° |
| 7-iron ↗ | Loft: 34 ° Lie: 61.5 ° |
| 8-iron ↗ | Loft: 38 ° Lie: 62 ° |
| 9-iron ↗ | Loft: 42 ° Lie: 62.5 ° |
| PW ↗ | Loft: 46 ° Lie: 63 ° |
Identifying the right model
- A satin cavity back with an MX-900 badge at its centre below a Mizuno wordmark, HYBRID HEMI COG lettering along the top edge and GRAIN FLOW FORGED on the hosel.
What to check before using the reference
- The US-site timeline labels this head 2006-2007.
- The linked chart lists a 34° 7-iron and 46° pitching wedge.
- The source range is 3 through PW; it describes listed specifications, not the contents of every retail or used set.
- Mizuno’s MX-950 chart lists the same lofts from 3-iron to PW with whole-degree lies; the heads are different models.
- Mizuno’s MP-63 reference (2011-2012 timeline) carries an identical loft and lie table from 3-iron to PW, and the MP-64, MP-54, MP-69 and MP-59 charts (which also publish lengths) share every loft and lie with this head.
Checking a club you own? These are the maker's published figures for an original build, not measurements of your club, and a source date is not the year it was made. Bending, reshafting or a hosel adjustment changes loft, lie and length, so identify the head by its own markings and have a fitter measure it when its history is unclear.
Continue exploring iron sets
MizunoIron set
Hot Metal irons · JPX925
The JPX925 Hot Metal standard row includes a 28° 7-iron and a 54° set sand wedge.
28° 7-iron loftFull iron chart
MizunoIron set
Hot Metal Pro irons · JPX925
Mizuno publishes the same loft, lie and length sequence for JPX925 Hot Metal and Pro through GW, with different head dimensions.
28° 7-iron loftFull iron chart
MizunoIron set
Hot Metal HL irons · JPX925
The HL variant uses a 31° 7-iron and 45° pitching wedge in the JPX925 chart.
31° 7-iron loftFull iron chart
MizunoIron set
MP-64 irons · 2013-2014 timeline
MP-64 from Mizuno’s 2013-2014 timeline entry, with a 34° 7-iron and 46° pitching wedge in the linked factory chart.
34° 7-iron loftFull iron chart