Mizuno M.Craft X 3 (2026 US page)

Published loft

3.0°

Published lie angle

70°

Published length options

34, 35 in

Documented specifications & build options

Mizuno’s published specification for each neck of this head at the review date; 34 and 35 in are the listed stock lengths with the KBS CT120 shaft. Head weight is not published because the back and sole weights are interchangeable.

Source: Mizuno M.Craft X putters US specification page. Reviewed 2026-10-22.

Specifications by configuration

Identifying the right model

• Mizuno’s Z3 model image shows the parts of the head apart: a rounded mallet back section with two raised ribs and a white sight line, the forged face block with its hollow sole cavity, two round sole weights and the zero-torque neck shaft.

What to check before using the reference

• Mizuno’s page lists Zero Torque, Plumber, Slant and Bend necks for the family; its table identifies each model by a letter and an offset description only (B: Full Shaft +, S: 3/4 Shaft, P: Full Shaft, Z: Onset).
• Mizuno names the 3 head as one of two shapes added to the M.Craft X family for 2027 together with the zero-torque Z neck; the table also lists it with the B, S and P necks.
• Mizuno lists the S3 in right- and left-hand; the B3, P3 and Z3 are right-hand only.