GuidesAbout
Browse Clubs
Home/Club database/Putters/LIMIT3D ENZO
PUTTER MODEL REFERENCE

Cobra LIMIT3D ENZO (2026 US page)

LIMIT3D ENZO putter from Cobra’s US product page: single bend hosel, 0.0° toe hang, 34.00, 35.00 in stock lengths at 365 g head weight, 70.0° lie.

By Golf Club ReferenceReference reviewed 2026-10-22
Published length options
34.00, 35.00 in
Hosel type
Single Bend
Toe hang
0.0°
Cobra LIMIT3D ENZO (2026 US page)
Model image · Cobra LIMIT3D ENZO. Image source ↗

Documented specifications & build options

Cobra’s published stock builds by cut length; head weight and handedness are listed per length.

Cobra LIMIT3D ENZO · manufacturer specifications
FieldDocumented value
Published length options34.00, 35.00 in
Hosel typeSingle Bend
Toe hang0.0°
Descending face loft zonesDLT: 4°, 3°, 2°, 1°
Published lie angle70.0 °

Source: Cobra LIMIT3D ENZO 3D Printed Putter US product page. Reviewed 2026-10-22.

Specifications by configuration

Cobra LIMIT3D ENZO · documented configurations
ConfigurationPublished values
34.00" stock build ↗
Length: 34.00 in
Head weight: 365.0 g
Lie: 70.0 °
Hosel: Single Bend
Toe hang: 0.0°
Face loft zones: DLT: 4°, 3°, 2°, 1°
Handedness: RH
35.00" stock build ↗
Length: 35.00 in
Head weight: 365.0 g
Lie: 70.0 °
Hosel: Single Bend
Toe hang: 0.0°
Face loft zones: DLT: 4°, 3°, 2°, 1°
Handedness: RH/LH

Identifying the right model

  • A gunmetal winged mallet with a single white sight line, a lattice visible through the rear cut-outs, a single-bend shaft and no toe-hang neck.

What to check before using the reference

  • Cobra sells the LIMIT3D putters as limited editions, fully 3D printed in 316L stainless steel per the description; face-balanced single bend, 365 g at both lengths, 34 in right-handed only and 35 in RH/LH.
Checking a club you own? These are the maker's published figures for an original build, not measurements of your club, and a source date is not the year it was made. Bending, reshafting or a hosel adjustment changes loft, lie and length, so identify the head by its own markings and have a fitter measure it when its history is unclear.
Understanding club loft →Measuring club length →

Continue exploring putters

Cobra 3DP TOUR AGERA · Putter
CobraPutter

3DP TOUR AGERA

3DP TOUR AGERA putter reference with documented 34, 35 inch length choices. Match the exact head and shaft configuration before comparing the build.

4, 3, 2, 1° Face loft zones (DLT)Model reference
Cobra 3DP TOUR AGERA RS
CobraPutter

3DP TOUR AGERA RS

3DP TOUR AGERA RS specifications: Mallet head type, 34.00, 35.00 in published length options.

DLT: 4°, 3°, 2°, 1° Descending face loft zonesModel reference
Cobra 3DP TOUR GRANDSPORT 35
CobraPutter

3DP TOUR GRANDSPORT 35

3DP TOUR GRANDSPORT 35 specifications: Oversize Blade head type, 34.00, 35.00 in published length options.

DLT: 4°, 3°, 2°, 1° Descending face loft zonesModel reference
Cobra 3DP TOUR SUPERNOVA
CobraPutter

3DP TOUR SUPERNOVA

3DP TOUR SUPERNOVA specifications: Oversize Fang head type, 34.00, 35.00 in published length options.

DLT: 4°, 3°, 2°, 1° Descending face loft zonesModel reference