Home/Club database/Putters/HB SOFT 2 Model 10.5 P
PUTTER MODEL REFERENCE

Cleveland HB SOFT 2 Model 10.5 P · Putter

Cleveland HB SOFT 2 Model 10.5 P putter: 3° loft, 70° lie, 34 in and 35 in stock lengths, 365 g head, plumber's neck hosel.

Published length options
34, 35 in
Published loft
3°
Published lie angle
70°
Cleveland HB SOFT 2 Model 10.5 P · Putter
Model image · Cleveland HB SOFT 2 Model 10.5 P. Image source ↗

Documented specifications & build options

Cleveland’s published stock builds on Dunlop Sports’ US store at the review date; lengths in inches.

Cleveland HB SOFT 2 Model 10.5 P · manufacturer specifications
FieldDocumented value
Published length options34, 35 in
Published loft3 °
Published lie angle70 °
Head weight365 g
Hosel typePlumber's Neck
Toe hangModerate
Stroke typeSlight Arc
Alignment1 Line
Stock gripPistol

Source: Cleveland Golf HB SOFT 2 Model 10.5 P putter specifications (Dunlop Sports US store). Reviewed 2026-10-22.

Specifications by configuration

Cleveland HB SOFT 2 Model 10.5 P · documented configurations
ConfigurationPublished values
34" stock build ↗
Length: 34 in
Head weight: 365 g
Lie: 70 °
Loft: 3 °
Hosel: Plumber's Neck
Toe hang: Moderate
Stroke type: Slight Arc
Alignment: 1 Line
Stock grip: Pistol
Hand: RH
35" stock build ↗
Length: 35 in
Head weight: 365 g
Lie: 70 °
Loft: 3 °
Hosel: Plumber's Neck
Toe hang: Moderate
Stroke type: Slight Arc
Alignment: 1 Line
Stock grip: Pistol
Hand: RH

Identifying the right model

  • A squared mid-mallet with HB SOFT 2 lettering across the sole, MODEL 10.5 OPTIMIZED MILLING along the face edge, a plumber’s-neck hosel and 10.5 on the rear edge of the sole.

What to check before using the reference

  • Cleveland’s footnote says putter shafts 35 in and over include a 20 g counterbalance weight.
  • Cleveland also sells an HB SOFT 2 Black Model 10.5P (black finish) on its own page without a specification table.
Checking a club you own? These are the maker's published figures for an original build, not measurements of your club, and a source date is not the year it was made. Bending, reshafting or a hosel adjustment changes loft, lie and length, so identify the head by its own markings and have a fitter measure it when its history is unclear.