IRON SET MODEL REFERENCE
Tour Edge Exotics Ti-Utility (2026 US page)
Exotics Ti-Utility from Tour Edge’s US product page, listed as #2 (17°), #3 (19°) and #4 (22°) heads at 38.75–39.75 in.
- Published loft options
- 17, 19, 22°
- Published heads
- 2-iron, 3-iron, 4-iron
- Published lie range
- 59–60°
Documented specifications & build options
Individually sold utility iron heads from Tour Edge’s US product page, lengths in inches; right-hand only per the table heading.
| Field | Documented value |
|---|---|
| Published loft options | 17, 19, 22 ° |
| Published heads | 2-iron, 3-iron, 4-iron |
| Published lie range | 59–60 ° |
| Published length range | 38.75–39.75 in |
| Listed shaft options | Fujikura Ventus Red/Black; Fujikura Ventus Blue/Black |
Source: Tour Edge Exotics Ti-Utility US product page specifications. Reviewed 2026-10-22.
Published specifications by club
| Configuration | Published values |
|---|---|
| 2-iron ↗ | Loft: 17 ° Lie: 59 ° Length: 39.75 in Handedness: RH |
| 3-iron ↗ | Loft: 19 ° Lie: 59.5 ° Length: 39.25 in Handedness: RH |
| 4-iron ↗ | Loft: 22 ° Lie: 60 ° Length: 38.75 in Handedness: RH |
Identifying the right model
- A chrome hollow-body utility with EXOTICS in black and TI-UTILITY in blue low on the back, a black TOUR EDGE badge with two screws in the upper centre and a milled-texture band along the upper toe; the club number is stamped on the sole.
What to check before using the reference
- Tour Edge’s table carries a column headed “FACE ANGLE” that prints 4.0 mm for the #2, 3.5 mm for the #3 and 3.0 mm for the #4; the millimetre figures are reproduced here as printed, without an offset label.
Checking a club you own? These are the maker's published figures for an original build, not measurements of your club, and a source date is not the year it was made. Bending, reshafting or a hosel adjustment changes loft, lie and length, so identify the head by its own markings and have a fitter measure it when its history is unclear.
Continue exploring iron sets
Tour EdgeIron set
Exotics C725 irons · 2026 US page
Exotics C725 from Tour Edge’s current US product page, with a 30° 7-iron and 44° pitching wedge.
30° 7-iron loftFull iron chart
Tour EdgeIron set
Exotics E725 irons · 2026 US page
Exotics E725 from Tour Edge’s current US product page, with a 27.5° 7-iron and 42° pitching wedge.
27.5° 7-iron loftFull iron chart
Tour EdgeIron set
Exotics X725 irons · 2026 US page
Exotics X725 from Tour Edge’s current US product page, with a 29° 7-iron and 43.5° pitching wedge.
29° 7-iron loftFull iron chart
Tour EdgeIron set
Exotics CB irons · 2026 US page
Exotics CB from Tour Edge’s current US product page, with a 32° 7-iron and 46° pitching wedge.
32° 7-iron loftFull iron chart