DRIVER MODEL REFERENCE

Titleist GT1 · Driver

GT1 driver from Titleist’s current product page: 3 heads (9, 10, 12°), 45.5 in standard length.

Published loft options
9, 10, 12°
Published lie
59°
Published length
45.5 in
Titleist GT1 · Driver
Model image · Titleist GT1. Image source ↗

Documented specifications & build options

Titleist’s published specification table on the current product page: standard loft, lie (A1 hosel position where the page says so) and men’s standard length in inches.

Titleist GT1 · manufacturer specifications
FieldDocumented value
Published loft options9, 10, 12 °
Published lie59 °
Published length45.5 in
Published head volume460 cc

Source: Titleist GT1 driver product page. Reviewed 2026-10-22.

Specifications by configuration

Titleist GT1 · documented configurations
ConfigurationPublished values
9° head ↗
Loft: 9 °
Lie: 59 °
Length: 45.5 in
Head volume: 460 cc
Handedness: RH/LH
10° head ↗
Loft: 10 °
Lie: 59 °
Length: 45.5 in
Head volume: 460 cc
Handedness: RH/LH
12° head ↗
Loft: 12 °
Lie: 59 °
Length: 45.5 in
Head volume: 460 cc
Handedness: RH/LH

Identifying the right model

  • Titleist’s photo shows GT1 (red 1) on a silver bar across the sole, a single oval weight port below the bar, the loft (10.0) printed beside the hosel and no sliding weight track.

What to check before using the reference

  • Titleist’s table gives GT1 its own lie row: 59° in the A1 SureFit hosel position for all three heads, where GT2, GT3 and GT4 list 58.5°.
  • The page footnotes 44.5 in as the standard women’s length and 43.5 in as the junior/youth length; 45.5 in is the men’s standard.
  • Titleist’s compare block lists the GT1 head at 460 cc.
Checking a club you own? These are the maker's published figures for an original build, not measurements of your club, and a source date is not the year it was made. Bending, reshafting or a hosel adjustment changes loft, lie and length, so identify the head by its own markings and have a fitter measure it when its history is unclear.