FAIRWAY WOOD MODEL REFERENCE
Titleist GT1 3Tour · Fairway wood
GT1 3Tour fairway from Titleist’s current product page: 1 head (14.5°), 43 in standard length.
- Published loft options
- 14.5°
- Published lie
- 56.5°
- Published length
- 43 in

Documented specifications & build options
Titleist’s published specification table on the current product page: standard loft, lie (A1 hosel position where the page says so) and men’s standard length in inches.
| Field | Documented value |
|---|---|
| Published loft options | 14.5 ° |
| Published lie | 56.5 ° |
| Published length | 43 in |
Source: Titleist GT1 3Tour fairway product page. Reviewed 2026-10-22.
Specifications by configuration
| Configuration | Published values |
|---|---|
| 14.5° head ↗ | Loft: 14.5 ° Lie: 56.5 ° Length: 43 in Handedness: RH/LH |
Identifying the right model
- The GT1 fairway sole bar with 3 TOUR (red TOUR) printed near the hosel instead of a loft number, a weight screw at the heel end of the bar and a round port at the toe end.
What to check before using the reference
- Titleist lists the GT1 3Tour as a single 14.5° head at 56.5° and 43 in in the shared GT fairway table; the page describes a stronger “Tour Loft” than the standard GT1 fairway.
- The page footnotes women’s length as 1 in and junior/youth length as 2 in under standard.
Checking a club you own? These are the maker's published figures for an original build, not measurements of your club, and a source date is not the year it was made. Bending, reshafting or a hosel adjustment changes loft, lie and length, so identify the head by its own markings and have a fitter measure it when its history is unclear.



