HYBRID MODEL REFERENCE

TaylorMade Rescue Mid (2004 archive edition)

Rescue Mid (2004 sheet): 16° to 25° heads, 40.5 to 39 in.

Published loft options
16, 19, 22, 25°
Published lie
59, 59.5, 60, 60.5°
Published length
40.5, 40, 39.5, 39 in
TaylorMade Rescue Mid (2004 archive edition)
Model image · TaylorMade Rescue Mid. Image source ↗

Documented specifications & build options

Factory sheet linked from TaylorMade’s year-by-year archive, lengths in inches. Men’s/women’s pairs appear only where the sheet labels both.

TaylorMade Rescue Mid · manufacturer specifications
FieldDocumented value
Published loft options16, 19, 22, 25 °
Published lie59, 59.5, 60, 60.5 °
Published length40.5, 40, 39.5, 39 in
Published steel length40, 39.5, 39, 38.5 in

Source: TaylorMade Rescue Mid 2004 factory specification sheet. Reviewed 2026-10-22.

Specifications by configuration

TaylorMade Rescue Mid · documented configurations
ConfigurationPublished values
2 · 16° ↗
Loft: 16 °
Handedness: RH / LH
Lie: 59 °
Length: 40.5 in
Steel length: 40 in
3 · 19° ↗
Loft: 19 °
Handedness: RH / LH
Lie: 59.5 °
Length: 40 in
Steel length: 39.5 in
4 · 22° ↗
Loft: 22 °
Handedness: RH / LH
Lie: 60 °
Length: 39.5 in
Steel length: 39 in
5 · 25° ↗
Loft: 25 °
Handedness: RH / LH
Lie: 60.5 °
Length: 39 in
Steel length: 38.5 in

Identifying the right model

  • Sole view with RESCUE MID lettering along the sole, a TaylorMade T badge on the black crown-edge band, 19° on that band by the hosel and a 3 at the toe end, on a black shaft with a silver ferrule.

What to check before using the reference

  • The 2004 sheet prints graphite and steel lengths (graphite 40.5 to 39 in, steel half an inch shorter) and no head volume, and marks all four heads left-handed; TaylorMade’s 2005 “Rescues” sheet repeats the same Rescue Mid table with the Ultralite graphite (S, R, M) and Lite Metal steel (S, R) shafts at D3.
  • A separate 2004 “Women’s Rescue Mid” sheet lists the 19°, 22° and 25° heads right-handed only at 39, 38.5 and 38 in.
  • TaylorMade describes a wide, low-profile head with moderate offset, a 455 steel Pull Face and a cambered double sole.
Checking a club you own? These are the maker's published figures for an original build, not measurements of your club, and a source date is not the year it was made. Bending, reshafting or a hosel adjustment changes loft, lie and length, so identify the head by its own markings and have a fitter measure it when its history is unclear.