DRIVER MODEL REFERENCE

TaylorMade RBZ Stage 2 (2013 archive edition)

RBZ Stage 2 driver (2013 catalog sheet): 460 cc head in 9.5°, 10.5° and HL 13°, 61° lie, 46 in.

Published loft options
9.5, 10.5, 13°
Published lie
61°
Published length
46 in
TaylorMade RBZ Stage 2 (2013 archive edition)
Model image · TaylorMade RBZ Stage 2. Image source ↗

Documented specifications & build options

Factory sheet linked from TaylorMade’s year-by-year archive, lengths in inches. Men’s/women’s pairs appear only where the sheet labels both.

TaylorMade RBZ Stage 2 · manufacturer specifications
FieldDocumented value
Published loft options9.5, 10.5, 13 °
Published lie61 °
Published length46 in
Published head volume460 cc

Source: TaylorMade RBZ Stage 2 2013 factory specification sheet. Reviewed 2026-10-22.

Specifications by configuration

TaylorMade RBZ Stage 2 · documented configurations
ConfigurationPublished values
9.5° head ↗
Loft: 9.5 °
Handedness: RH / LH
Lie: 61 °
Head volume: 460 cc
Length: 46 in
Swing weight: D6
10.5° head ↗
Loft: 10.5 °
Handedness: RH / LH
Lie: 61 °
Head volume: 460 cc
Length: 46 in
Swing weight: D6
HL · 13° ↗
Loft: 13 °
Handedness: RH only
Lie: 61 °
Head volume: 460 cc
Length: 46 in
Swing weight: D6

Identifying the right model

  • The sole photo shows a black sole with large white RBZ lettering running diagonally across it, a round screw weight above the lettering on the toe side, a rectangular recess beside it, TaylorMade script along the rear edge toward the heel, a yellow STAGE 2 band on the white crown edge at the top and a 9.5 badge on the white panel above the hosel.

What to check before using the reference

  • The loft sleeve adds ±1.5° to each standard loft (9.5° from 8° to 11°, 10.5° from 9° to 12°, HL 13° from 11.5° to 14.5°); the HL head is listed right-handed only.
  • Stock build on the sheet: Fujikura RocketFuel 50 shaft (X, S, R, M) with an RBZ Lite .620 43 g grip at D6; a Fuji Fuel 60 TPW shaft and .600 47 g grip are listed for the TP build.
  • The same sheet lists the RBZ Stage 2 Tour driver at 9° and 10.5°, 45.5 in and D4.
Checking a club you own? These are the maker's published figures for an original build, not measurements of your club, and a source date is not the year it was made. Bending, reshafting or a hosel adjustment changes loft, lie and length, so identify the head by its own markings and have a fitter measure it when its history is unclear.