DRIVER MODEL REFERENCE
TaylorMade r7 quad HT (2005 archive edition)
r7 quad HT driver (2005 sheet): 400 cc head in 8.5° to 11.5° at 59° and 45 in.
- Published loft options
- 8.5, 9.5, 10.5, 11.5°
- Published lie
- 59°
- Published length
- 45 in
Documented specifications & build options
Factory sheet linked from TaylorMade’s year-by-year archive, lengths in inches. Men’s/women’s pairs appear only where the sheet labels both.
| Field | Documented value |
|---|---|
| Published loft options | 8.5, 9.5, 10.5, 11.5 ° |
| Published lie | 59 ° |
| Published length | 45 in |
| Published head volume | 400 cc |
Source: TaylorMade r7 quad HT 2005 factory specification sheet. Reviewed 2026-10-22.
Specifications by configuration
| Configuration | Published values |
|---|---|
| 8.5 · 8.5° ↗ | Loft: 8.5 ° Handedness: RH only Lie: 59 ° Head volume: 400 cc Length: 45 in |
| 9.5 · 9.5° ↗ | Loft: 9.5 ° Handedness: RH / LH Lie: 59 ° Head volume: 400 cc Length: 45 in |
| 10.5 · 10.5° ↗ | Loft: 10.5 ° Handedness: RH / LH Lie: 59 ° Head volume: 400 cc Length: 45 in |
| 11.5 · 11.5° ↗ | Loft: 11.5 ° Handedness: RH only Lie: 59 ° Head volume: 400 cc Length: 45 in |
Identifying the right model
- Sole view with r7 quad lettering and an HT suffix beneath it, TaylorMade script, four TLC ports and 9.5 at the heel; TITANIUM is printed along the crown edge.
What to check before using the reference
- TaylorMade describes the HT as a shallower, wider-faced r7 quad for a higher launch angle and spin rate; it shares the 400 cc volume, 59° lie and 45 in length of the r7 quad, with left-handed heads at 9.5° and 10.5°.
- The stock shaft is the M.A.S.² 7-55 (TS, S, R, M; 55–58 g) at D3, with an M.A.S.² 7-50 L flex and a TGT 62 grip on the same sheet.
Checking a club you own? These are the maker's published figures for an original build, not measurements of your club, and a source date is not the year it was made. Bending, reshafting or a hosel adjustment changes loft, lie and length, so identify the head by its own markings and have a fitter measure it when its history is unclear.
Continue exploring drivers
TaylorMadeDriver
M2 · 2016 archive edition
M2 driver (2016 sheet): 460 cc head in 9.5° and 10.5°, 45.75 in.
9.5, 10.5° Published loft optionsModel reference
TaylorMadeDriver
M1 460 · 2017 archive edition
M1 460 driver (2017 sheet): 460 cc head in 8.5° to 12°, 45.5 in.
8.5, 9.5, 10.5, 12° Published loft optionsModel reference
TaylorMadeDriver
Qi10 · 2024 archive edition
Qi10 driver (2024 sheet): 460 cc head in 9°, 10.5° and 12°, 56° to 60° adjustable lie, 45.75 in.
9.0, 10.5, 12.0° Published loft optionsModel reference
TaylorMadeDriver
Qi10 LS · 2024 archive edition
Qi10 LS driver (2024 sheet): 460 cc head in 8°, 9° and 10.5°, 45.75 in.
8.0, 9.0, 10.5° Published loft optionsModel reference