TaylorMade M2 Tour (2017 archive edition)

Published loft options

15, 16.5°

Published lie

59°

Published length

43.25 in

Documented specifications & build options

Factory sheet linked from TaylorMade’s year-by-year archive, lengths in inches. Men’s/women’s pairs appear only where the sheet labels both.

Source: TaylorMade M2 Tour 2017 factory specification sheet. Reviewed 2026-10-22.

Specifications by configuration

Identifying the right model

• The sole photo shows a compact black sole with a lime-green M2 badge and TOUR lettering beneath it in the upper middle, a round weight port beside the badge toward the face, TaylorMade script below the badge, GEOCOUSTIC lettering at the rear crown edge, a slot along the face side and a white 3 badge with 15° above the hosel.

What to check before using the reference

• The Tour heads are about 20 cc smaller than the standard 2017 M2 fairway (175 cc and 177 cc at 15° and 16.5°) with a 59° lie against 60°; both heads are listed right-handed only.
• Stock build on the sheet: Mitsubishi Kuro Kage TiNi 70FW shaft (X, S, R) with a Lamkin UTx Cord 52 g grip at D3; the sheet describes a forward weight port and a 6-layer carbon crown.
• The table is page 4 of TaylorMade’s combined 2017 M2 metalwoods sheet, linked as the M2 Driver sheet in the 2017 archive column.