TaylorMade M1 (2016 archive edition)

Published loft options

15, 17, 19°

Published lie range

56.5–60.5, 57–61°

Published length

43.25, 42.25 in

Documented specifications & build options

Length column (LENGTH M/W, one value per head) of the sheet linked from TaylorMade’s year-by-year archive, in inches; the sheet is a page image, so the table was read from the page rather than from a text layer.

Source: TaylorMade M1 2016 factory specification sheet. Reviewed 2026-10-22.

Specifications by configuration

Identifying the right model

• The sole photo shows a white crown edge with a red 15° badge at the top on the face side, a black sole with two round sliding weights on a track lettered FADE and DRAW along the face side with a red N between them, TaylorMade script across the middle, a white M1 with a gold 1 toward the heel and a red 3 badge above the hosel.

What to check before using the reference

• The 3HL 17° head is listed right-handed only; the 3 and 5 are also left-handed.
• Stock build on the sheet: Fujikura Pro 70 shaft (X, S, R, M) with a TM Lamkin Performance 360 52 g grip at D4; the front track carries two 15 g sliding weights.
• The 2017 M1 fairway sheet lists the same three heads at 56° to 61° lie ranges with 150 cc, 151 cc and 132 cc.