TaylorMade M1 460 (2016 archive edition)

Published loft options

8.5, 9.5, 10.5, 12°

Published lie range

58–62°

Published length

45.5 in

Documented specifications & build options

Men’s length column (LENGTH M) of the sheet linked from TaylorMade’s year-by-year archive, in inches; the sheet is a page image, so the table was read from the page rather than from a text layer.

Source: TaylorMade M1 460 2016 factory specification sheet. Reviewed 2026-10-22.

Specifications by configuration

Identifying the right model

• The sole photo shows a white crown edge with TaylorMade script at the top, a black sole with a red sliding weight on a rear track lettered HIGH and LOW across the middle, a black sliding weight on a front track lettered FADE and DRAW along the face side, 460 printed above the rear track toward the face, a white M1 with a gold 1 low toward the heel and a red 9.5 badge above the hosel.

What to check before using the reference

• The same sheet lists the M1 430 head at 8.5°, 9.5° and 10.5°, right-handed only, 430 cc and 45.5 in; the 460 is left-handed at 9.5° and 10.5°.
• Stock shafts on the sheet: Fujikura Pro 60 (X, S, R, M), Mitsubishi KuroKage TiNi Silver 60 (X, S, R) and Aldila Rogue Silver 70 (X, S) with a TM Lamkin Performance 360 52 g grip at D4; the T-Track holds a 15 g front and a 10 g back weight and the loft sleeve spans 4° (±2°).
• TaylorMade’s M1 Special Edition sheet lists the same head in a red, white and blue colourway at 9.5° and 10.5°, right-handed only, 58° to 62°, 460 cc and 45.25 in with a Fujikura Speeder Evolution TS 661 shaft.
• The 2017 M1 460 and 2018 M3 460 sheets print the same lofts, lie range and length.