PING 2024 Tyne H (2024)
2024 Tyne H putter from PING’s US product page: mallet head, 3° loft, 35 in standard length, 370 g head weight.
- Published loft
- 3°
- Published length options
- 35 in
- Head weight
- 370 g
Documented specifications & build options
PING’s documented standard build at the review date: standard length, head weight, hosel, face and stock shaft as published. Lie angle and loft are kept in PING’s own printed notation (base value plus the adjustment range PING offers).
| Field | Documented value |
|---|---|
| Published loft | 3 ° |
| Published length options | 35 in |
| Head weight | 370 g |
| Head type | Mallet |
| Offset (PING’s description) | Full Shaft |
| Face construction | Shallow milled |
| Head material (PING’s description) | 17-4 stainless steel w/ black PVD finish |
| Stroke type (PING’s fitting label) | Slight Arc |
| Lie angle (PING’s notation, as printed) | 20° ±4° |
| Loft adjustment (PING’s notation, as printed) | 3° +3°/-2° |
| Stock shaft | PING composite |
| Standard grip | PP60 |
Source: PING 2024 Tyne H putter US product page. Reviewed 2026-10-22.
Specifications by configuration
| Configuration | Published values |
|---|---|
| 2024 Tyne H ↗ | Length: 35 in Head weight: 370 g Loft (PING’s notation, as printed): 3° +3°/-2° Lie angle (PING’s notation, as printed): 20° ±4° Offset (PING’s description): Full Shaft Face construction: Shallow milled Stroke type (PING’s fitting label): Slight Arc Stock shaft: PING composite Standard grip: PP60 |
Identifying the right model
- Seen from above, an all-black mallet with a C-shaped open back between two prongs, a short white line at the base of the opening and a black plumber’s neck at the heel.
What to check before using the reference
- PING describes the Tyne H as the twin-fork design paired with an Anser (plumber’s-neck) hosel; the 2023 Prime Tyne 4 (separate record) uses PING’s H4 hosel with 3/4-shaft offset.
Continue exploring putters
Scottsdale TEC Ketsch Onset
Scottsdale TEC Ketsch Onset putter reference with documented 35 inch length choices. Match the exact head and shaft configuration before comparing the build.
PLD Milled Ally Blue 4
PLD Milled Ally Blue 4 specifications: Mallet head type, 370 g head weight.
PLD Milled Anser
PLD Milled Anser specifications: Blade head type, 3 ° published loft.
PLD Milled DS72
PLD Milled DS72 specifications: Mid Mallet head type, 365 g head weight.