Cobra OPTM LS (2026 US page)

Published loft options

9.0, 10.5°

Published length

45.5 in

Published lie

57.0°

Documented specifications & build options

Standard head specifications from Cobra’s US specification table at the standard FutureFit33 hosel setting and the 45.50 in stock length; the Tour Length rows come from Cobra’s separate OPTM LS Tour Length page (44.50 in).

Source: Cobra OPTM LS driver US product page. Reviewed 2026-10-22.

Specifications by configuration

Identifying the right model

• A black sole with a carbon-weave panel, cobra lettering across the middle beside a small LS badge, OPTM ACCURACY lettering along the rear edge, a round ACCURACY weight (11) on the toe side and a FADE weight (7) at the rear corner on the hosel side, with 9.0° printed on the FF33 hosel sleeve.

What to check before using the reference

• Cobra lists the 9.0° and 10.5° heads as separate right- and left-handed rows; the left-handed rows carry the custom-only asterisk, and Cobra’s footnote says select head, shaft and flex offerings are custom only.
• Swing weight is given by shaft (D4 with the MCA Kai’li Dark Waves, D3 with the Project X Denali).
• Cobra’s OPTM LS Tour Length page lists the same heads at 44.50 in with every row marked custom only; those builds are the Tour Length configuration rows, not a separate model.