Home/Club database/Fairway woods/Big Bertha Fusion
FAIRWAY WOOD MODEL REFERENCE

Callaway Big Bertha Fusion (2016)

Big Bertha Fusion fairway wood from Callaway Golf Pre-Owned’s archived specification data: 3 heads from 15.0° to 21.0°, 42–43 in standard length.

Published loft options
15.0, 18.0, 21.0°
Published heads
3W, 5W, 7W
Published length range
42–43 in
Callaway Big Bertha Fusion (2016)
Model image · Callaway Big Bertha Fusion. Image source ↗

Documented specifications & build options

Standard head specifications from Callaway Golf Pre-Owned’s specification table. Values describe the stock build and standard hosel setting; custom lengths, shafts and settings differ.

Callaway Big Bertha Fusion · manufacturer specifications
FieldDocumented value
Published loft options15.0, 18.0, 21.0 °
Published heads3W, 5W, 7W
Published length range42–43 in
Published lie range57.5–58.5 °
Published head volume149–178 cc

Source: Callaway Big Bertha Fusion fairway wood specifications, Callaway Golf Pre-Owned, Internet Archive capture of 2017-11-14. Reviewed 2026-10-22.

Specifications by configuration

Callaway Big Bertha Fusion · documented configurations
ConfigurationPublished values
3W · 15.0° ↗
Loft: 15.0 °
Lie: 57.5 °
Length: 43 in
Head volume: 178 cc
Swing weight by stock shaft: D2
Handedness: RH / LH
5W · 18.0° ↗
Loft: 18.0 °
Lie: 58.0 °
Length: 42.5 in
Head volume: 160 cc
Swing weight by stock shaft: D2
Handedness: RH / LH
7W · 21.0° ↗
Loft: 21.0 °
Lie: 58.5 °
Length: 42 in
Head volume: 149 cc
Swing weight by stock shaft: D2
Handedness: RH / LH

Identifying the right model

  • A black sole with BIG BERTHA FUSION lettering in white and red, a round weight port at the rear of the sole, the club number (3) in a dark panel toward the toe and Callaway script along the rear edge.

What to check before using the reference

  • Callaway lists head volumes of 178, 160 and 149 cc for the 3W, 5W and 7W.
Checking a club you own? These are the maker's published figures for an original build, not measurements of your club, and a source date is not the year it was made. Bending, reshafting or a hosel adjustment changes loft, lie and length, so identify the head by its own markings and have a fitter measure it when its history is unclear.